Material Safety Data Sheet – Wizard Pipe Wraps

Material Safety Data Sheet for FW-4048-BS-PVC
May be used to comply with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 Standard must be consulted for specific requirements.

Section 1. IDENTITY Common Name (used on label) FW-4048-BS-PVC

FW-4048-BS-PVC is a high density, high performance poly vinyl with a mesh core specifically made for Flange Wizard Inc.  Offers excellent resistance to water, coolant, oil and fuels. Certain chemicals such as: lacquer thinner, acetone, paint thinner, etc, will not damage the material but may remove the ink.  It has excellent strength and stability characteristics. Melting temps are 320°F = (160°C).

Section 2. HAZARDOUS INGREDIENTS – IDENTITY INFORMATION

Hazardous Components

(Specific Chemical Identity; Common Name(s) – Asbestos Free Not Applicable

OSHA PEL Not Applicable            ACGIH TLV Not Applicable

Other Limits Recommended Not Applicable     % (optional) Not Applicable

Section 3. PHYSICAL – CHEMICAL CHARACTERISTICS

Boiling Point Not Applicable Specific Gravity     (H20 =1)

1.3     Vapor Pressure (mm Hg.)       Not Applicable Melting Point Not Applicable

Vapor Density (Air = 1)     Not Applicable Evaporation Rate     (Butyl Acetate = 1)

Not Applicable Solubility in Water Negligible     Appearance and Odor Form Furnished in sheets and rolls

Color Black Odor None

Section 4. FIRE AND EXPLOSION HAZARD DATA

Flash Point (Methods Used Not Applicable Flammable Limits Not Applicable

LEL UEL

Extinguishing Media Water / CO2

Special Fire Fighting Procedures Wear Self Contained Breathing Apparatus

Unusual Fire and Explosion Hazards Toxic Vapors may be released

While the information and recommendations set forth herein are believed to be accurate as of the date of preparation, THE MANUFACTURER MAKES NO WARRANTY WITH RESPECT THERETO AND DISCLAIMS ALL LIABILITY FROM RELIANCE THEREON. FW-4048-BS-PVC

Section 5. REACTIVITY DATA

Stability Unstable Stable XXX

Conditions to avoid   Hot, poorly ventilated areas     Incompatibility (Materials to Avoid) None to our knowledge

Hazardous Decomposition or Byproducts Burning may yield carbon monoxide, hydrogen sulfide and other toxic vapors

Hazardous Polymerization May Occur – Will Not Occur XXX

Section 6. HEALTH HAZARD DATA

Route(s) of Entry Inhalation XXX Skin XXX Ingestion      Health Hazards (Acute and Chronic)     None to our knowledge

Carcinogenicity NTP IARC Monographs OSHA Regulated     Signs and Symptoms of Exposure

Medical Conditions Generally Aggravated by Exposure     Emergency and First Aid Procedures

Remove to fresh air. Wash skin with soap and water.

Section 7. PRECAUTIONS FOR SAFE HANDLING AND USE

Steps to Be Taken in Case Material Is Released or Spilled     Not applicable

Waste Disposal Method     Dispose of in accordance with federal, state and local regulations.

Precautions to Be Taken in Handling and Storing     Store in a cool well ventilated area.

Other Precautions     Not normally required.

Section 8. CONTROL MEASURES

Respiratory Protection (Specify Type)     Not normally required if adequate ventilation is provided.

Ventilation     Local exhaust recommended at elevated temperatures and for slitting and cutting.

Protective Gloves N/A Eye Protection     Not normally required.

Other Protective Clothing or Equipment     Not normally required.

Work Hygienic Practices     Follow usual measures of personal hygiene.

N/A = Not Applicable NC = Not Classifiable Y = Yes N = No